![]() The bow limbs flex when the bow is drawn back. The upper and lower bow limbs attach to the bow’s riser and cams. Normally the Berger button hole is located above the pivot point of the bow handle. The arrow is lined up level with the Berger button hole. It can also be used for a plunger button which is part of an arrow rest. The Berger hole or is on the bow riser and it is where the arrow rest will go or to be mounted near. ![]() Some target compound bows and bowhunting models have low, medium and high grip options that can be changed to suit the archers shooting style and preference. Some risers have a replaceable grip, which might be a plastic or plastic / wood material. The bow grip is located in the middle of the bow riser. ![]() Target compound bows will have a longer riser for stability.Ī bowhunting compound bow will have a shorter riser so it can be maneuvered easier in a tree stand or hunting blind. Today the risers have a skeleton high tech cut out to save weight, but still give the bow a solid design, yet lighter weight and reduce hand shock. Older compound bows had a solid riser, some were even made out of wood. Some top end bows can have a graphite / carbon construction. Otherwise the arrow won’t tune well or fly straight.)Ī compound bow riser is normally made with a combination of metals. This also means the precisely spined arrow needs to be used. The arrow sticks out partially sideways from the riser. (As opposed to a bow like a longbow design, were the arrow rest shelf and riser is not centershot. Bow clearance, accuracy and potentially making the bow and arrow set up easier to tune are some benefits of a center shot bow. A center shot riser helps so the arrow can be nocked and released without contacting the bow riser. The compound bow riser is shaped / cut off center, between the bow grip and sight window. The bow riser is the main section of the bow with the handle on it and the limbs connect to it.Ĭompound bow risers have mounting holes for accessories to be attached like the: bow sight, arrow rest, stabilizer and cable guard.Ībove the grip is the shelf, is where the arrow rest goes. We will also cover the bow parts with added accessories like bow sights, stabilizer and bow quiver. So here are the parts of the compound bow with diagrams and names. However, with all the extra bow parts, the terminology can be confusing. String side was always preferred for it's compact quality, but sometimes the arrows, or the protective hood, would not fit without hitting the limbs.The compound bow is a great bow with a lot of high tech features far from traditional archery bow design. ![]() The big decision then, was whether to mount the quiver with the arrows on the string side of the bow, or sticking out past the front of the bow. Today there is a lot more flexibility with quivers, but when recurves were the norm, quivers were mounted with broad heads pointing up in at least 90% of the cases. It also seems to be easier for most archers to nock them when they are grabbed with the broad head up. I believe today's attached quivers simply followed that rule. It was considered safer to have them pointing up to prevent most injuries. Having the broad heads pointing down was a recipe for disaster as they could easily pierce anything they had the occasion to jab into. The hood could be removed from the arrows when they were still in the quiver. Years ago, when people first started putting quivers on bows, the broad heads were covered by a snap on hood.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |